Artificial grass looking matted and flat
Flattened Artificial Grass Pile: Reviving Worn Areas
Pile flattening is normal wear in traffic routes and under furniture. Whether it recovers depends on the yarn quality and whether the infill has been maintained.
Most 'worn out' lawns we see are simply under-maintained rather than finished.

Brushing and infill
Cross-brushing against the pile direction with a stiff broom or power brush lifts fibres and redistributes infill. Kiln-dried sand infill supports the blades, and it gradually migrates — topping it up restores structure.
Two or three brushes a year keeps most lawns looking full.
Yarn quality matters
Memory-retaining yarns with a stiffer spine recover better than cheap flat-blade turf. This is the difference you feel between a budget import and a quality product, and it shows after a couple of years.
Higher stitch density also spreads load so no individual blade takes as much.
Furniture, heat and permanent damage
Heavy furniture left in one place compresses the pile; moving it occasionally avoids permanent marks. Reflected sun from low-e glazing can melt fibres — a genuine cause of permanent damage that brushing cannot fix.
Where fibres are melted or split, a section replacement is the only repair.
Frequently asked questions
Can flattened grass be brought back?
Usually yes with cross-brushing and an infill top-up, unless the fibres are physically damaged.
How often should infill be topped up?
Typically every few years depending on traffic, rainfall and how often it is brushed.
Does a power brush damage the grass?
Not when used correctly — it is the standard maintenance tool for synthetic turf.
Related reading
Lawn looking tired?
We offer artificial grass maintenance, re-infill and section replacement.